A short text to describe your forum
https://www.universalmediaserver.com/forum/
https://www.universalmediaserver.com/forum/viewtopic.php?t=81
Code: Select all
#----------------------------------------------------------------------------
# Profile for DirecTV
# Boxes Tested: H23-600, H25-500, HR34-700 (Genie), HR24-500 (DVR)
# See PS3.conf for a description of all possible configuration options.
#
# This profile is still in an experimental stage.
# You are encouraged to experiment and report back the results on the forums
# at http://www.universalmediaserver.com/forum/
#
# Know Issues: if three or more boxes are trying to watch the same movie at the same time,
# the third box will jump into someones stream; not intrupting the origional streamer.
#
#---------------------General informations / detection-----------------------
RendererName=DirecTV HR
RendererIcon=directvhr.png
# UserAgentSearch: regular expression to detect the connected renderer.
# DirecTV has been observed using the following user agents:
#
# User-Agent: Linux/2.6.18-lttng-0.6.41, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.18.5, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.31-2.6, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.31-2.6, UPnP/1.0 DIRECTV JHUPnP/1.0
# Combined regular expression of working user agents
UserAgentSearch=DIRECTV
# UserAgentAdditionalHeaders: additional HTTP header for better detection
UserAgentAdditionalHeader=DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
UserAgentAdditionalHeaderSearch=
#Basic capabilities
Video=true
Audio=true
Image=true
#--------------------DLNA settings-------------------------------------------
# Use the DLNA feature seek by time and not by range
SeekByTime=true
# Serve different flavors of localization in the DLNA parameters (PAL/NTSC, NA/EU/JP)
# to allow every worldwide renderer to see the files.
DLNALocalizationRequired=true
#--------------------Transcoding/Muxing capabilities-------------------------
# Transcode profiles for video and audio engines
# currently supported: MPEGPSAC3, MPEGTSAC3 or WMV for video, LPCM, WAV or MP3 for audio
TranscodeVideo=MPEGPSAC3
TranscodeAudio=MP3
# Use default DVD buffer size: false = greater bitrate and faster encoding,
# but can generate incompatible videos, depends of your media renderer
DefaultVBVBufSize=true
# Does the media renderer supports DTS wrapped into LPCM in a mpeg file ?
WrapDTSIntoPCM=false
# Does the Device need Muxing? (false by default)
MuxH264ToMpegTS=true
MuxDTSToMpeg=true
MuxLPCMToMpeg=true
# MIME Changes? (oldmime=newmime|olemime2=newmime2|...)
#MimeTypesChanges=
# Maximum bit rate supported by the media renderer (0=unlimited)
MaxVideoBitrateMbps=8
# Max Width and Height supported by the media renderer (0=unlimited)
MaxVideoWidth=0
MaxVideoHeight=0
# Does the media renderer supports only H264 L4.1 at most?
H264Level41Limited=false
# Does music files need to be resampled at 44.1kHz?
TranscodeAudioTo441kHz=true
# Does the client need to receive transcoded video with minimal delay ?
# (Useful when the client has a small timeout delay)
TranscodeFastStart=true
# Size of the transcoded file (unknown length) sent to the renderer (could
# determine browsing failure/success) Possible values:
#
# -1: Specific value working with the PS3, means perfect transcoding
# and copying support (it is against the DLNA spec though)
# 0: size attribute is NOT sent to the renderer (default value if
# this parameter isn't used)
# 100000000000: 100Gb, if you want to be sure that the media file is not cut
# before the end
TranscodedVideoFileSize=-1
#--------------------Misc Settings--------------------------------------------
# Rotate JPEG files based on EXIF information
AutoExifRotate=false
# Disable these once MediaInfo=True works.
# What extensions are forcefully transcoded
# Don't use this if MediaInfo=true, prefer codec configurations
TranscodeExtensions=mpeg2,lpcm,mp3,wav,jpg,mpegps,mpegts,wmv,avi,mp4,mov,flv,rm,mkv,wavpac,aac,ac3,mpa,ogg,wma,dts,dtshd,truehd,eac3,atrac,flac,ape,ra,mpc,aiff,alac,dv,mpeg1,divx,h264,mjpeg,vc1,png,gif,tiff,bmp,und
# What extensions are forcefully streamed as is (and not transcoded)
# Don't use this if MediaInfo=true, prefer codec configurations
#StreamExtensions=
#--------------------Meat and Potatos----------------------------------------
# CustomMencoderOptions: Overrides the MEncoder custom options in UMS for
# this renderer. The below has been Tweeked for DirecTV MediaShare!
CustomMencoderOptions = -channels 2 -lavdopts debug=0:threads=4 -lavcopts autoaspect=1:vcodec=mpeg2video:acodec=mp2:abitrate=192:threads=8:keyint=0:vqscale=1:vqmin=1:vrc_maxrate=8192:vrc_buf_size=8192 -aid 0 -nosub -noautosub -ofps 24000/1001 -vf scale=1280:720 -lavdopts fast -mc 0.1 -af lavcresample=44100 -srate 44100 -o
#hold
# -vf expand=-0:-2,softskip
#----------------------------------------------------------------------------
MediaInfo=false
# All supported media formats of this renderer (the rest will be transcoded)
# First steps towards a faster/proper file/codec/mimetype management system (false by default)
# 1- Parse files with mediainfo on Windows/OSX (Linux too if libmediainfo and libzen installed)
# 2- Deprecate following parameters: MuxH264ToMpegTS,MuxDTSToMpeg,MuxLPCMToMpeg,MimeTypesChanges
# 3- The server will skip badly parsed, corrupted files or wrong coding, preventing potential playback errors
# 4- Faster browsing, due to the launch of ffmpeg/mplayer first thumbnailer process with each http client request, rather than in the browse DLNA request
# Use MediaInfo for faster and proper file, codec and mime type management
# system (false by default).
#
# The media parser and this configuration file will recognize the following
# formats and codecs (lower case only, regular expressions are supported).
# Chosen from the most common used and supported formats and codecs.
#
# mpegps (mpeg presentation stream, used in DVD Videos, VCDs, etc.)
# mpegts (mpeg transport stream, used in sat tv, blu rays, etc.)
# wmv (Windows Media Video, tag also used for asf files)
# avi (AVI container)
# mp4 (ISOM/MPEG4 container, or MPEG4 codec)
# mov (Quicktime container, Apple)
# flv (Flash Video)
# rm (Real Media, RMVB)
# mkv (Matroska)
# wav (WAVE file)
# wavpac (WavPack)
# lpcm (Linear PCM)
# aac (Advanced Audio Codec)
# ac3 (Audio Coding 3)
# mp3 (Mpeg Audio Layer 3)
# mpa (Mpeg Audio)
# ogg (Ogg Vorbis)
# wma (Windows Media Audio)
# dts (Digital Theater Systems)
# dtshd (Digital Theater Systems)
# truehd (TrueHD)
# eac3 (Extended AC3)
# atrac (Atrac)
# flac (Free Lossless Audio Codec)
# ape (Monkey's Audio)
# ra (Real Audio)
# mpc (MusePack)
# aiff (AIFF)
# alac (Apple Lossless)
# dv (Digital Video)
# mpeg1 (Codec used in VCD)
# mpeg2 (Codec used in DVD Videos and HDTV)
# divx (DivX Video)
# h264 (H264)
# mjpeg (M-JPEG)
# vc1 (VC-1)
# jpg (Jpeg)
# png (PNG)
# gif (GIF)
# tiff (TIFF)
# bmp (Bitmap)
# und (Undetermined, if the parser did not recognize one of above)
# Usage [IN ORDER TOO]:
# f: format, MANDATORY (the only conf for a 'eat everything' renderer would be f:.+)
# v: video codec
# a: audio codec
# n: max nb of audio channels (2 or 6)
# s: max audio sample frequency in Hz
# b: max audio bitrate in bps
# w: max width in pixels
# h: max height in pixels
# m: mimetype, STRONGLY RECOMMENDED (if not declared, an estimated value is assigned)
# other flags: right now, only qpel and gmc (see avi)
#
# In case of multiple matches, the first mime type of the list is the used one.
# Be careful with regexps such as .+ : You should not use these except when you
# are sure your renderer is quite versatile.
# [Supported video formats]:
#Supported = f:mpegts v:mpeg2 a:mp2 n:2 s:44100 b:192000 m:video/mpeg
# [Supported audio formats]:
#Supported = f:mp3 n:2 s:44100 m:audio/mpeg
# [Supported image formats]:
#Supported = f:jpg m:image/jpeg
# Use faster method to create DLNA tree with MediaInfo. Not supported by some renderers,
# false by default (upnp specification violation).
CreateDLNATreeFaster = true
#----------------------------------------------------------------------------Code: Select all
#----------------------------------------------------------------------------
# Profile for DirecTV
# Boxes Tested: H23-600, H25-500, HR34-700 (Genie), HR24-500 (DVR)
# See PS3.conf for a description of all possible configuration options.
#
# This profile is still in an experimental stage.
# You are encouraged to experiment and report back the results on the forums
# at http://www.universalmediaserver.com/forum/
#
# Know Issues: if three or more boxes are trying to watch the same movie at the same time,
# the third box will jump into someones stream; not intrupting the origional streamer.
#
#---------------------General informations / detection-----------------------
RendererName=DirecTV HR
RendererIcon=directvhr.png
# UserAgentSearch: regular expression to detect the connected renderer.
# DirecTV has been observed using the following user agents:
#
# User-Agent: Linux/2.6.18-lttng-0.6.41, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.18.5, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.31-2.6, UPnP/1.0 DIRECTV JHUPnP/1.0 DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
# User-Agent: Linux/2.6.31-2.6, UPnP/1.0 DIRECTV JHUPnP/1.0
# Combined regular expression of working user agents
UserAgentSearch=DIRECTV
# UserAgentAdditionalHeaders: additional HTTP header for better detection
UserAgentAdditionalHeader=DLNADOC/1.00 DIRECTV VIIV devices INTEL_NMPR/2.1
UserAgentAdditionalHeaderSearch=
#Basic capabilities
Video=true
Audio=true
Image=true
#--------------------DLNA settings-------------------------------------------
# Use the DLNA feature seek by time and not by range
SeekByTime=true
# Serve different flavors of localization in the DLNA parameters (PAL/NTSC, NA/EU/JP)
# to allow every worldwide renderer to see the files.
DLNALocalizationRequired=true
#--------------------Transcoding/Muxing capabilities-------------------------
# Transcode profiles for video and audio engines
# currently supported: MPEGPSAC3, MPEGTSAC3 or WMV for video, LPCM, WAV or MP3 for audio
TranscodeVideo=MPEGPSAC3
#??????
TranscodeAudio=MP3
# Use default DVD buffer size: false = greater bitrate and faster encoding,
# but can generate incompatible videos, depends of your media renderer
DefaultVBVBufSize=true
# Does the media renderer supports DTS wrapped into LPCM in a mpeg file ?
WrapDTSIntoPCM=false
# Does the Device need Muxing? (false by default)
MuxH264ToMpegTS=true
MuxDTSToMpeg=true
MuxLPCMToMpeg=true
# MIME Changes? (oldmime=newmime|olemime2=newmime2|...)
#MimeTypesChanges=
# Maximum bit rate supported by the media renderer (0=unlimited)
MaxVideoBitrateMbps=8
# Max Width and Height supported by the media renderer (0=unlimited)
MaxVideoWidth=0
MaxVideoHeight=0
# Does the media renderer supports only H264 L4.1 at most?
H264Level41Limited=false
# Does music files need to be resampled at 44.1kHz?
TranscodeAudioTo441kHz=true
# Does the client need to receive transcoded video with minimal delay ?
# (Useful when the client has a small timeout delay)
TranscodeFastStart=true
# Size of the transcoded file (unknown length) sent to the renderer (could
# determine browsing failure/success) Possible values:
#
# -1: Specific value working with the PS3, means perfect transcoding
# and copying support (it is against the DLNA spec though)
# 0: size attribute is NOT sent to the renderer (default value if
# this parameter isn't used)
# 100000000000: 100Gb, if you want to be sure that the media file is not cut
# before the end
TranscodedVideoFileSize=-1
#--------------------Misc Settings--------------------------------------------
# Rotate JPEG files based on EXIF information
AutoExifRotate=false
# Disable these once MediaInfo=True works.
# What extensions are forcefully transcoded
# Don't use this if MediaInfo=true, prefer codec configurations
#TranscodeExtensions=mpeg2,lpcm,mp3,wav,jpg,mpegps,mpegts,wmv,avi,mp4,mov,flv,rm,mkv,wavpac,aac,ac3,mpa,ogg,wma,dts,dtshd,truehd,eac3,atrac,flac,ape,ra,mpc,a
iff,alac,dv,mpeg1,divx,h264,mjpeg,vc1,png,gif,tiff,bmp,und
# What extensions are forcefully streamed as is (and not transcoded)
# Don't use this if MediaInfo=true, prefer codec configurations
#StreamExtensions=
#--------------------Meat and Potatos----------------------------------------
# CustomMencoderOptions: Overrides the MEncoder custom options in UMS for
# this renderer. The below has been Tweeked for DirecTV MediaShare!
CustomMencoderOptions = -channels 2 -lavdopts debug=0:threads=4 -lavcopts
autoaspect=1:vcodec=mpeg2video:acodec=mp2:abitrate=192:threads=8:keyint=25:vqmax=8:vqmin=3:vrc_maxrate=3000:vrc_buf_size=1835 -aid 0 -nosub -noautosub -ofps
24000/1001 -vf scale=1280:720 -lavdopts fast -mc 0.1 -af lavcresample=44100 -srate 44100 -o
#hold
# -vf expand=-0:-2,softskip
#----------------------------------------------------------------------------
MediaInfo=false
# All supported media formats of this renderer (the rest will be transcoded)
# First steps towards a faster/proper file/codec/mimetype management system (false by default)
# 1- Parse files with mediainfo on Windows/OSX (Linux too if libmediainfo and libzen installed)
# 2- Deprecate following parameters: MuxH264ToMpegTS,MuxDTSToMpeg,MuxLPCMToMpeg,MimeTypesChanges
# 3- The server will skip badly parsed, corrupted files or wrong coding, preventing potential playback errors
# 4- Faster browsing, due to the launch of ffmpeg/mplayer first thumbnailer process with each http client request, rather than in the browse DLNA request
# Use MediaInfo for faster and proper file, codec and mime type management
# system (false by default).
#
# The media parser and this configuration file will recognize the following
# formats and codecs (lower case only, regular expressions are supported).
# Chosen from the most common used and supported formats and codecs.
#
# mpegps (mpeg presentation stream, used in DVD Videos, VCDs, etc.)
# mpegts (mpeg transport stream, used in sat tv, blu rays, etc.)
# wmv (Windows Media Video, tag also used for asf files)
# avi (AVI container)
# mp4 (ISOM/MPEG4 container, or MPEG4 codec)
# mov (Quicktime container, Apple)
# flv (Flash Video)
# rm (Real Media, RMVB)
# mkv (Matroska)
# wav (WAVE file)
# wavpac (WavPack)
# lpcm (Linear PCM)
# aac (Advanced Audio Codec)
# ac3 (Audio Coding 3)
# mp3 (Mpeg Audio Layer 3)
# mpa (Mpeg Audio)
# ogg (Ogg Vorbis)
# wma (Windows Media Audio)
# dts (Digital Theater Systems)
# dtshd (Digital Theater Systems)
# truehd (TrueHD)
# eac3 (Extended AC3)
# atrac (Atrac)
# flac (Free Lossless Audio Codec)
# ape (Monkey's Audio)
# ra (Real Audio)
# mpc (MusePack)
# aiff (AIFF)
# alac (Apple Lossless)
# dv (Digital Video)
# mpeg1 (Codec used in VCD)
# mpeg2 (Codec used in DVD Videos and HDTV)
# divx (DivX Video)
# h264 (H264)
# mjpeg (M-JPEG)
# vc1 (VC-1)
# jpg (Jpeg)
# png (PNG)
# gif (GIF)
# tiff (TIFF)
# bmp (Bitmap)
# und (Undetermined, if the parser did not recognize one of above)
# Usage [IN ORDER TOO]:
# f: format, MANDATORY (the only conf for a 'eat everything' renderer would be f:.+)
# v: video codec
# a: audio codec
# n: max nb of audio channels (2 or 6)
# s: max audio sample frequency in Hz
# b: max audio bitrate in bps
# w: max width in pixels
# h: max height in pixels
# m: mimetype, STRONGLY RECOMMENDED (if not declared, an estimated value is assigned)
# other flags: right now, only qpel and gmc (see avi)
#
# In case of multiple matches, the first mime type of the list is the used one.
# Be careful with regexps such as .+ : You should not use these except when you
# are sure your renderer is quite versatile.
# [Supported video formats]:
#Supported = f:mpegts v:mpeg2 a:mp2 n:2 s:44100 b:192000 m:video/mpeg
# [Supported audio formats]:
#Supported = f:mp3 n:2 s:44100 m:audio/mpeg
# [Supported image formats]:
#Supported = f:jpg m:image/jpeg
# Use faster method to create DLNA tree with MediaInfo. Not supported by some renderers,
# false by default (upnp specification violation).
CreateDLNATreeFaster = true
#----------------------------------------------------------------------------
