Universal Media Server | Forum

Hello all,

The program is working fine for me, but I have a problem seeing the server from places connected to my network.
my network is as follows "router and connected to that router is 2 access points "
My renderer is a windows pc that is connected by cable to the main router .
I've got 2 TVs connected to each access point wirelessly.
the thing is I cannot see the icon of my media server at those TVs.

Really appreciate your help

The access points must not also act as routers, they must be "transparent"/"bridged" so that all devices are on the same IP subnet. You cannot share across subnets (not entirely true, but it's complicated to get it to work) and this is a limitation of the UPnP standard, not UMS.

If you are running IOS based equipment, you can forward multicast and UPNP messages by doing the following (IP services license required):

On your VLANs: In config mode:

Damm spammer, I'll leave his post but edit the link before I ban him

@mik_s You probably see some posts that I don't, but

mik_s wrote: ↑Tue Mar 30, 2021 7:20 am Damm spammer, I'll leave his post but edit the link before I ban him

..sure doesn't make any sense to me. Ban who, what post?

The op, the post was edited to add spam. dealt with him now

Ah, darn - if have to stop replying to them

At least it may help someone in the future. Found the original post here