Page 1 of 2
Samsung Soundbar MS 650
Posted: Sat Apr 18, 2020 4:10 am
by ancalimon
Is it possible to write a renderer for this device?
It uses a the renderer Samsung-CD.conf
I can see that there is a renderer for Samsung Soundbar MS 750. Maybe I can write a new one using that as a basis. Can someone help me?
I tried creating one for ms650 by modifying the one for ms750 by changing this line:
UserAgentSearch = Samsung Soundbar MS750
into reported name of device:
UserAgentSearch = [AV] Samsung Soundbar MS650
But it did not work.
Re: Samsung Soundbar MS 650
Posted: Sat Apr 18, 2020 6:40 am
by mik_s
Using the the conf for the MS750 is a good start, it probably will have the same capabilities. If the reported UserAgentSearch is "[AV] Samsung Soundbar MS650", I would change that line in the config to just
Code: Select all
UserAgentSearch = Samsung Soundbar MS650
also that config has a loading priority so that it overides the default Samsung-CD.conf, if UMS can can match the user agent correctly it will use that one.
We will need logs though to help any more if that doesn't work.
Re: Samsung Soundbar MS 650
Posted: Sun Apr 19, 2020 2:09 am
by ancalimon
- ums_dbg.zip
- Here is the tracelogs for Samsung MS650
- (149.55 KiB) Downloaded 438 times
I have attached the logs as told.
Re: Samsung Soundbar MS 650
Posted: Sun Apr 19, 2020 8:05 am
by mik_s
Did you try making a conf? I don't see any config for the MS650 getting loaded.
If you are basing it in the MS750 conf, copy that and rename to Samsung-Soundbar-MS650.conf,
then change the RendererName to match and make sure it is detected by making sure the UserAgentSearch is correct
the important part to look for is
Code: Select all
DEBUG 2020-04-18 17:06:18.396 [cling-9] net.pms.network.UPNPHelper New renderer found: "[AV] Samsung Soundbar MS650" with dlna details: {friendlyName=[AV] Samsung Soundbar MS650, address=192.168.1.5, udn=uuid:af66011d-0edf-4c87-810d-dcee1965f55b, manufacturer=Samsung Electronics, modelName=HW-MS650, modelNumber=AllShare1.0, modelDescription=Samsung SOUNDBAR DMR, manufacturerURL=http://www.samsung.com/sec, modelURL=http://www.samsung.com/sec}
using
Code: Select all
UserAgentSearch = Samsung Soundbar MS650
should work
Re: Samsung Soundbar MS 650
Posted: Tue Apr 21, 2020 1:40 pm
by ancalimon
It still loads the Samsung-NotCD.conf file even after creating the attached
file and putting it inside C:\Program Files (x86)\Universal Media Server\renderers
Re: Samsung Soundbar MS 650
Posted: Tue Apr 21, 2020 2:32 pm
by mik_s
Try setting the priority to 2, and do some more trace logs
Re: Samsung Soundbar MS 650
Posted: Wed Apr 22, 2020 6:05 am
by ancalimon
I have attached the new tracelogs after setting the priority of the config file to 2.
Re: Samsung Soundbar MS 650
Posted: Wed Apr 22, 2020 2:31 pm
by mik_s
Looks like it is still matching the Samsung-NotCD.config, but I do see that your config is getting loaded at startup. Could you post your config as since it wasn't used it wasn't included in the zip file.
Re: Samsung Soundbar MS 650
Posted: Thu Apr 23, 2020 12:45 am
by ancalimon
Is it this file?
UMS.conf- (59.6 KiB) Downloaded 417 times
If you are talking about MS650 config file, it is a few posts above. The only thing I changed is changing priority from 1 to 2.
Re: Samsung Soundbar MS 650
Posted: Thu Apr 23, 2020 3:53 pm
by mik_s
Sorry forgot that you already posted it
I don't see why it is not matching it, even if something else had a higher priority, setting it to 2 should make it take over.
Try setting UserAgentSearch to just MS650 see if that does anything