UMS network issue Android[XT1068]<->UMS
Forum rules
Please make sure you follow the Problem Reporting Guidelines before posting if you want a reply
Please make sure you follow the Problem Reporting Guidelines before posting if you want a reply
-
seemax1991
- Posts: 3
- Joined: Mon Nov 30, 2015 5:36 pm
UMS network issue Android[XT1068]<->UMS
Hello,
I installed UMS to test the Samsung TV and Home Theater devices (both DLNA-Certified(!)) that will arrive today.
I tried Serviio as well (worked) but had no transcoding profile for Android.
Issue: - 5001 UDP TCP in firewall open
- usm.exe allowed
- wrapper.exe allowed
- javaw.exe allowed by default
UMS shows incoming connection and recognizes my XT1068 as BubbleUPnP.
On my Android though, BubbleUPnP, Media House and other cleints are unable to detect and request files lists, UMS is not even shown.
HTTP server just works fine...
I will try (Serviio and UMS) with the Samsung TV as well and edit this post here later on.
- Seemax
I installed UMS to test the Samsung TV and Home Theater devices (both DLNA-Certified(!)) that will arrive today.
I tried Serviio as well (worked) but had no transcoding profile for Android.
Issue: - 5001 UDP TCP in firewall open
- usm.exe allowed
- wrapper.exe allowed
- javaw.exe allowed by default
UMS shows incoming connection and recognizes my XT1068 as BubbleUPnP.
On my Android though, BubbleUPnP, Media House and other cleints are unable to detect and request files lists, UMS is not even shown.
HTTP server just works fine...
I will try (Serviio and UMS) with the Samsung TV as well and edit this post here later on.
- Seemax
-
seemax1991
- Posts: 3
- Joined: Mon Nov 30, 2015 5:36 pm
Re: UMS network issue Android[XT1068]<->UMS
So i tested it with my Samsung TV and other devices even while deactivated firewall (what technically should not be needed with such software).
Any idea on what might is going wrong here?
Any idea on what might is going wrong here?
-
seemax1991
- Posts: 3
- Joined: Mon Nov 30, 2015 5:36 pm
Re: UMS network issue Android[XT1068]<->UMS
DLNA client of Kodi works fine o.O I do not get it...
Re: UMS network issue Android[XT1068]<->UMS
I've used BubbleuPnP against UMS many times (I usually use it to remote control other renderers), and that works "out of the box"/without any need for configuration. If you can't see UMS in BubbleuPnP I'd say you have problems on the network level. Either they are not on the same ip subnet (DLNA requirement) or a firewall or anti virus software is blocking something.
When it comes to disabling firewalls, the easy answer is that DLNA really isn't made for working with firewalls. It relies on multicast/broadcast of UDP packets, but also uses HTTP (TCP). Multiple incoming ports needs to be opened in addition to outgoing access.
I find that usually people run firewalls without any need. The OS makers want to play it safe and enable firewalls by default because they expect their users to not know what they are doing, but the fact is that you only need to run a local firewall if:
When it comes to disabling firewalls, the easy answer is that DLNA really isn't made for working with firewalls. It relies on multicast/broadcast of UDP packets, but also uses HTTP (TCP). Multiple incoming ports needs to be opened in addition to outgoing access.
I find that usually people run firewalls without any need. The OS makers want to play it safe and enable firewalls by default because they expect their users to not know what they are doing, but the fact is that you only need to run a local firewall if:
- You connect directly to the internet without a router with NAT (your PC's IP will be a public IP).
- You connect to unsecure/public/untrusted Wifi networks
- You wish to block access to your computer from other devices on your local network
- If you have IPv6 internet access and haven't properly configured the firewall in your router (IPv6 has no NAT which makes it more complicated)