Using UMS to stream from a NAS

For help and support with Universal Media Server
Forum rules
Please make sure you follow the Problem Reporting Guidelines before posting if you want a reply
Post Reply
kmedeiros
Posts: 3
Joined: Sat Jan 18, 2014 8:02 am

Using UMS to stream from a NAS

Post by kmedeiros »

I'm thinking about purchasing a gigabit 4TB NAS server and I have a few devices that I need to use UMS to transcode/remux files for certain streamers. If I'm running UMS on my PC like I currently am can I just map a drive and point UMS to the NAS?

This would be a Windows 7 machine running UMS.

Also, what would the performance be like in this kind of configuration? Has anyone tried it? Everything would be connected via a gigabit connection on the same switch.
Heba
Posts: 12
Joined: Fri Nov 22, 2013 10:46 pm

Re: Using UMS to stream from a NAS

Post by Heba »

didn´t do it with an nas but with another machine in the network



Files to be streamed <-PC-Router1-Router2-StreamingClient with UMS
|
PS3

100 MBit LAN ---> Worked
User avatar
DeFlanko
Posts: 724
Joined: Thu Jun 21, 2012 3:43 am
Location: San Pedro, CA
Contact:

Re: Using UMS to stream from a NAS

Post by DeFlanko »

One thing to consider when hosting on a NAS is that your now limited to the NAS's processor as well as the network card on the NAS device, the router or switch's processor and connection speed.
(alot more variables.)


Granted to should not be bad -- but i can see how if you have a standard PC that doesn't support RAID 5 then a NAS is a way to go to provide for Data Reliability. (after all thats the only reason why you would ever need a NAS)

Otherwise if your System board can DO RAID 5 -- then host on your system.


For example:

I use a Server Workstation - Xeon board that can do Raid 5 for all my Disks. I have no need for a NAS. (one less thing to fail)
User avatar
Optimus_prime
Posts: 678
Joined: Fri Jun 01, 2012 6:39 pm
Location: Sydney, Australia

Re: Using UMS to stream from a NAS

Post by Optimus_prime »

I have been running NAS 4 Free with UMS and it worked fine. ZFS, in my opinion is much better than a raid 5 setup. I used a raid 5 (hardware adaptec card) for a long time but after reading about zfs i changed (but one trade off is you will need a little more hardware). Once again only an opinion.
For some more info, i am running all that on a Dual Xeon E5-2609 running Hyper-V Server 2012 R2, with a VM instance dedicated to NAS 4 Free and it's ZFS array (you don't need a setup like this to run NAS 4 Free with ZFS).
How Ask For Support
Remember, Debug Log's Can/Will Help and Explain your issues, we're not mind reader's but here to help
OS's I Use And Can Assist With: Windows 7/8, Mac OS-X 10.8 & 10.9
Mac OS-X Java 7 Builds Mac OS-X Java 7 Forum
User avatar
DeFlanko
Posts: 724
Joined: Thu Jun 21, 2012 3:43 am
Location: San Pedro, CA
Contact:

Re: Using UMS to stream from a NAS

Post by DeFlanko »

Optimus_prime wrote:I have been running NAS 4 Free with UMS and it worked fine. ZFS, in my opinion is much better than a raid 5 setup. I used a raid 5 (hardware adaptec card) for a long time but after reading about zfs i changed (but one trade off is you will need a little more hardware). Once again only an opinion.
For some more info, i am running all that on a Dual Xeon E5-2609 running Hyper-V Server 2012 R2, with a VM instance dedicated to NAS 4 Free and it's ZFS array (you don't need a setup like this to run NAS 4 Free with ZFS).
BOOM.
Post Reply